|
Pulse Generator
The HM5035 Pulse Generator is most suited for analog, digital and logic applications in
versatile environments. Pulses of varying frequencies and duration are available from its normal or complementary data outputs. A built-in-error LED indicates when pulse width is greater than pulse period. Output amplitudes are available upto 10V (open circuit).
The impressive performance, ease of operation and low cost make HM5035 a favourite for a large variety of analog and digital applications such as testing, logic interfacing, differential input amplifiers, or simulation of line drivers, opposite phase clocks and switching cycles.
Salient Features
- Wide Frequency Range 2Hz to 20MHz
- Pulse duration 20ns to 200ms
- Fast rise/fall time of 3ns
- Complementary Dual Outputs
- Internal, External & Manual Triggering
Technical Specifications
| Operating Modes |
Internal, External & Manual Triggering |
| Frequency Range |
2Hz to 20MHz in 7 decade steps
Variable Control between steps |
| Pulse Duration |
20ns to 200ms in 7 decade steps
Variable Control between steps |
| Symmetric Square Wave |
Pulse Duty factor 50% ± 10ns to 2MHz,
50% ± 5% ± 10ns from 2MHz to 20MHz |
| Jitter |
< ± 0.5% |
Single Pulse
| Pulse Duration |
< 20 ns to > 200ms |
Pulse Characteristics
| Risetime/ Falltime |
3ns (10% - 90%) approx |
| Overshoot |
5% of pulse amplitude approx |
| Top Ripple |
±2% of pulse amplitude approx |
| Preshoot |
< ± 2% of pulse amplitude |
Dual Outputs
| + Amplitude |
max. +5V into 50H against ± variable from +2Vto+5V |
| - Amplitude |
max. -5V into 5011 against 1 variable from -2V to -5V |
| Attenuator |
1:2.5 (-8dB) (variable from ±0.8V to ±5V) |
| Output Impedance |
50H (both outputs) |
External Trigger Input
| Pulse Repetition Frequency |
0 to 20MHz |
| Pulse Duration |
20ns min |
| Trigger Delay |
approx. 20ns |
| Trigger Level |
Sinewave > 1 Vp orTTL-compatible square wave > +1V |
| Max. Input Voltage |
30Vpp approx |
| Trigger Output |
Short circuit proof |
| Amplitude |
0/+1.9V into 50£1, 0/< + 4V open circuit TTL-Compatible; fan-outs: 5 |
| Rise time / Falltime |
approx. 10ns |
| Aberration |
approx. ± 10% of pulse amplitude |
| Pulse Duty Cycle |
identical to non inverted signal |
General Information
| Supply |
230V AC, ±10%, 50Hz |
| Power Consumption |
18VA approx |
| Operating Condition |
0-40°C 95% RH |
| Dimension |
W:196, H:80, D:237mm |
| Weight |
2.8kg approx |
|
